Paradigm 15 Channel Remote Displaying '18'

Paradigm 15 Channel Remote Displaying '18'

If you find that your 15 Channel remote is displaying 18 this can mean two things. Please see below the possibilities for your remote showing 18.

Remote Displaying 18

1. The battery in the remote is low / flat and will need to be replaced.

2. The Battery is not making correct contact. Please make sure the battery is correctly fitted in the remote and that it is making firm contact.


    • Related Articles

    • Copy Channels From an Existing Remote to a New Remote

      It is Possible to copy channels from an existing remote to a new remote. Note: You will not be able to copy group channels, channel 0 or channel ALL. Only channel with individual shade programmed can be copied to a new remote via steps below in the ...
    • Remote (P2) Button Locations and Functions

      The P2 button is a programming button located on every remote. Typically, it is found on the back of the remote, under the battery cover. Refer to the images below for the P2 location on different control devices  Reflect on the Programming ...
    • What Battery Goes Into My Remote?

      The 1-channel and 15-channel handheld remotes take a CR2450 coin cell battery. Push 5 remote takes a CR2430 coin cell battery. Other remotes and switches take different batteries as is appropriate.
    • Group channels on Push 15 remote

      Push 15 remote has group channels apart from channel 1-15 on which user can group channels on. These group channel can be seen if you scroll pass through channel 15. Group channel are A,B,C,D,E. How to do grouping on these Group channels To do ...
    • Can't Set Limits? How to Lock and Unlock Your Remote

      All Automate control devices can be locked and unlocked. Locking them keeps any accidental programming from being possible. Make sure you lock your remote when you are done with any programming Please refer to your specific control device ...