Can't Set Limits? How to Lock and Unlock Your Remote
All Automate control devices can be locked and unlocked. Locking the remote can prevent accidental reprogramming. Ensure the remote(s) are locked once programming is complete.
Please refer to your specific control device instructions if you cannot find the Lock/Unlock Button
How to Lock and Unlock Your Remote
Relevant Documentation
Related Products
Related Articles
How Do I Adjust My Limits?
What are limits? Limits are set during installation—the upper limit determines the highest position, and the bottom limit determines the lowest position of you shade. Over time, you may want to adjust them, if your shade doesn’t fully open or close ...Why Can't I Change My Limits?
If you are having issues trying to change your blinds limits your remote maybe locked. Below is how to lock and unlock your remote. It is good practice to lock the remote once you have setup your blinds, as this will prevent accidentally deleting ...How Do I Adjust Limits In the Pulse 2 App?
Adjusting limits is an easy and quick process. Should you want to adjust your shade's limits via the Pulse 2 app, please see below. How To Adjust Limits in the Pulse 2 App Relevant Documentation Pulse 2 Setup Guide - iOS Pulse 2 Setup Guide - ANDROID ...Remote (P2) Button Locations and Functions
The P2 button is a programming button located on every remote. Typically, it is found on the back of the remote, under the battery cover. Refer to the images below for the P2 location on different control devices Reflect on the Programming ...How to Activate Fabric Tension (FT) Mode
If you want to use Ultra-lock function, the Bottom limit MUST be set within the LOCKING ZONE. Jog the weight bar down until you hear the locking pin click into the latch housing and set Bottom How to Activate Fabric Tension (FT) Mode After doing ...