Assigning a Static IP Address to your Pulse 2 hub utilizing the MAC Address
The Pulse 2 Hub has 4 different MAC addresses.
The one that
is shown on AWS Cloud is the Wi-Fi station MAC address and is the base for all
the other MAC addresses.
The others can be calculated off
this one as follows:
Wi-Fi Station MAC: Base MAC + 0
Wi-Fi soft AP MAC: Base MAC + 1
Bluetooth MAC: Base MAC + 2
Ethernet MAC: Base MAC + 3.
For
instance, when setting a static IP on the network, first confirm how the hub will be communicating within the network -- via Wi-Fi or ethernet cable. Depending on how the hub connects to the network will determine the configuration for the static IP.
Wi-Fi Station MAC: Base MAC + 0 which can be located on AWS Cloud and within the app.
Ethernet MAC: Base MAC + 3 needs
to be calculated manually.
Both MAC addresses can be traced on
the network using the MAC address itself or either the static IP that has been
assigned.
Related Articles
Pulse PRO Hub: Troubleshooting WPA3 Security and Router Settings
If you're having trouble connecting your Pulse Pro Hub to your Wi-Fi network, it could be due to your router using WPA3 security settings. This issue is commonly seen with certain routers, like the NETGEAR Nighthawk MK93S mesh router system, but it ...
Pulse PRO Hub: Reconnect Offline Hub [iPhone and Android]
If your Pulse Pro Hub was previously set up but is now offline, don’t worry—this article will guide you through the steps to get it back online. First, check your network and make sure there are no issues. If your Wi-Fi credentials or Internet ...
Pairing A Pulse 2 Hub via Wi-Fi [iOS - Apple]
How To Pair Your Pulse 2 Hub via Wi-Fi on Apple (iOS) Devices The Pulse 2 hub is certified with Apple Devices and has native HomeKit integration. This means you can control Siri with voice commands the moment you setup your hub and shades! Follow the ...
Deleting a Shade From the Pulse 2 App
If you are having issue with a device/shade when utilizing the Pulse 2 app, it may be recommended to delete and re-add the problematic device. How To Delete A Device Long press (2 seconds) a tile. i.e. 0.5nm highlighted in red below. Relevant ...
Pairing A Pulse 2 Hub via Ethernet [Android]
How To Pair Your Pulse 2 Hub via Ethernet on Android Devices The Pulse 2 Hub can be paired via Ethernet to bypass dual-band Wi-Fi networks. Please ensure to back-up your Wi-Fi in case you need to move the hub to another location within the home. ...