Related Articles
How to Pair/Un-Pair Motor From a Remote
Pairing or Un-pairing a motor from a remote is the same process. How to Pair or Un-Pair/Remote a Motor From a Remote Relevant Documentation Automate Li-Ion Programming Instructions Related Products Automate Controllers Automate Motors
How to do a Factory Reset a Motor
Press and hold the P1 button for approximately 14 seconds to receive 4 jogs and 4 beeps. The P1 button may be a different location depending on the type of motor you have How to Factory Reset a Motor Relevant Documentation Automate Programming ...
5v Li-Ion Motor | Advantages over 12v Li-Ion Motor (1st Gen)
Rollease Acmeda's 5v Zero Li-Ion motors boasts many advantages over that of its predecessor - the 12v Li-ion motor. 5v Zero Li-Ion Highlights Reduced Motor Head thickness (Smaller Light Gaps) compared to the 12v motor offering. Integrated USB ...
Solar Powered ARC Wind & Sun Sensor - Pairing Sensor to Motor
This is the process to pair the Wind and Sun Sensor to an ARC Motor Ensure the wind and sun sensor functionality on the motor is activated prior to pairing the Wind and Sun Sensor You will need to press P2 on wind sensor twice during the process, ...
Motor (P1) Button Locations & Functions
The P1 is found on every motor type. It is used for initial pairing and additional programming steps. Below is the location of the button on various motor models. Tubular Motor - Roller, Roman, or Zebra Shades Cord Lift Motor - Cellular and Honeycomb ...