Pulse 1 Hub Incorrect Time & Date

Pulse 1 Hub Incorrect Time & Date

These are the instructions to adjust or correct the Time and Date on the Automate Pulse App for the Pulse 1 Hub.

If the displayed time and date on the app are incorrect, you might need to adjust the time settings to correct it.

This process applies to the Pulse 1 Hub only. These do NOT apply to Pulse 2 Hub

To Adjust | Correct the Time and Date

1.  Open the Automate Pulse App and select the location from the Locations section.
  

2.     Select your connected Hub.


3. Hub Time - Date and Time should update automatically.










4. Select "Hub Time" to adjust it - a window asking to confirm that you want to set up time will pop up: Press OK.



5.      Update to correct Time and Date.


6. Press Done to record the updated date and time.


Relevant Documentation


    • Related Articles

    • Pulse PRO: Reconnecting When Offline [iPhone and Android]

      If your Pulse PRO was previously set up but is now offline, don’t worry—this article will guide you through the steps to get it back online. First, check your network and make sure there are no issues. If your Wi-Fi credentials or Internet Service ...

    • Pulse 2: Pairing via Wi-Fi [iPhone]

      The Pulse 2 Hub can be paired via Wi‑Fi, which is useful for better positioning the Pulse 2 Hub in your home. With native Apple HomeKit integration, Apple devices connect your Pulse 2 Hub to Wi‑Fi automatically without requiring a password. This ...

    • Automate Pulse 1 Hub - Offline or App Unavailable

      Please note that the Automate Pulse 1 has been discontinued and support may be limited At this point the Pulse 1 has been discontinued for several years and as a result the app is losing support and servers are being shut down. Please contact your ...

    • Pulse 2: Pairing via Ethernet [iPhone]

      The Pulse 2 Hub can be paired via Ethernet, which is useful if your router’s combined 2.4 GHz/5 GHz network is causing compatibility issues. During setup, you can enter Wi‑Fi credentials. After pairing, you can either disconnect the Ethernet cable to ...

    • Pulse 2: Pairing via Ethernet [Android]

      The Pulse 2 Hub can be paired via Ethernet, which is useful if your router’s combined 2.4 GHz/5 GHz network causes compatibility issues. During setup, you can enter Wi‑Fi credentials. After pairing, you can either disconnect the Ethernet cable to ...