How Do I Know When My Motor Needs to Be Charged?

• Related Articles

• 5v Li-Ion Motor | Advantages over 12v Li-Ion Motor (1st Gen)

  Rollease Acmeda's 5v Zero Li-Ion motors boasts many advantages over that of its predecessor - the 12v Li-ion motor.  5v Zero Li-Ion Highlights Reduced Motor Head thickness (Smaller Light Gaps) compared to the 12v motor offering. Integrated USB ...

• 5v Zero Li-Ion Motor | How Will I Know When My Motor Has Finished Charging?

  To know when your motor has finished charging, follow the steps outlined below. The following applies to 5V motors only Any 5V Micro-USB charger can be used to charge your motor. How Will I Know When My Motor Has Finished Charging? To fully charge ...

• How to Factory Reset a Motor

  Note: A factory reset will remove all remote pairings, and the shade will need to be set up again. How to Factory Reset a Motorized Shade To perform a factory reset on your motorized shade: Press and hold the P1 button for 14 seconds. (The shade will ...

• Solar Powered ARC Wind & Sun Sensor - Enabling Sensor Functionality on the Motor

  Prior to pairing the wind and sun sensor with a motor, the sensor functionality on the motor must be enabled.  These are the steps to enable or disable the sensor functionality on Automate Outdoor motors. Only external motors (FT or AX) can be paired ...

• Motor (P1) Button Locations & Functions

  The P1 is found on every motor type. It is used for initial pairing and additional programming steps. Below is the location of the button on various motor models. Tubular Motor - Roller, Roman, or Zebra Shades Cord Lift Motor - Cellular and Honeycomb ...