How Do I Program My Drapery Motor?

How Do I Program My Drapery Motor?

It is important to set the programming of the motor after both the motor and track have been assembled.

To ensure your shade is ready to be set up from scratch, factory reset it: 

How to Program a Drapery Motor

Relevant Documentation

    • Related Articles

    • Motor (P1) Button Locations & Functions

      The P1 is found on every motor type. It is used for initial pairing and additional programming steps. Below is the location of the button on various motor models. Tubular Motor - Roller, Roman, or Zebra Shades Cord Lift Motor - Cellular and Honeycomb ...
    • How to do a Factory Reset a Motor

      Press and hold the P1 button for approximately 14 seconds to receive 4 jogs and 4 beeps. The P1 button may be a different location depending on the type of motor you have How to Factory Reset a Motor Relevant Documentation Automate Programming ...
    • 5v Li-Ion Motor | Advantages over 12v Li-Ion Motor (1st Gen)

      Rollease Acmeda's 5v Zero Li-Ion motors boasts many advantages over that of its predecessor - the 12v Li-ion motor.  5v Zero Li-Ion Highlights Reduced Motor Head thickness (Smaller Light Gaps) compared to the 12v motor offering. Integrated USB ...
    • How Do I Setup My Shade/Motor?

      This article will show step by step, pairing with a Remote and programming the Motor limits for normal operation.       A new motor will have no programming and it will first need to be set up, for it to operate.       A motor that has had unexpected ...
    • How to Pair/Un-Pair Motor From a Remote

      Pairing or Un-pairing a motor from a remote is the same process. How to Pair or Un-Pair/Remote a Motor From a Remote Relevant Documentation Automate Li-Ion Programming Instructions Related Products Automate Controllers Automate Motors