Level-Setting Mode - Push Pro

This feature allows you to control your shade or group by percentage. Double-click the Stop button to activate the shade Level-Setting mode. Then, use the Up and Down buttons to adjust the desired shade percentage. 

100% refers to the shade being fully closed.

To exit the Level-Setting mode, double click the stop button again or press the back button.

• Related Articles

• Setting/Deleting Favorite Position - Push Pro (Installer Mode)

  To perform the following steps, ensure you are currently in Installer Mode - Push Pro Move Shade to desired position The following steps are used for Adding a Favorite Position, but are also for Deleting a Favorite Position if performed a second time ...

• Installer Mode - Push Pro

  Installer mode enables you to pair and adjust various settings, bypassing the usual step-by-step on screen instructions. Press the Menu button and select Settings by pressing the Enter button. On the Remote Settings screen, Select Installer Mode. To ...

• Adjusting Motor Speed - Push Pro (Installer Mode)

  To perform the following steps, ensure you are currently in Installer Mode - Push Pro Press P2 on remote (The menu button while in Installer Mode) Increase Speed Decrease Speed

• Copying Channels - Push Pro (Installer Mode)

  To perform the following steps, ensure you are currently in Installer Mode - Push Pro Set the old remote to the shade channel you wish to copy over Set the new remote to the shade channel you wish to copy the shade onto. Press P2 (Menu in Installer ...

• Push Pro FAQ

  What are the advantages of the Push Pro over the Push remote control? On-screen prompts guide you through setup and shade mode adjustment 2.4” LCD with backlit display, optional dark mode, and Smart Wake for instant control Identify and control ...