Pulse 1 Hub - How to Re-pair The Hub After Changing a Router or Internet Provider

Pulse 1 Hub - How to Re-pair The Hub After Changing a Router or Internet Provider

These are the steps to re-pair the Pulse 1 hub to a new Wi-Fi connection without loosing any settings.
Re-pairing the hub is necessary after a changing a router or internet provider.

Hub pairing must be done wirelessly and over a 2.4 GHz Network 
DO NOT Reset the hub | There is a factory reset button in the back of the hub that requires the use of a pin to push it, DO NOT do this as it will delete all the settings in the hub

How to Re-Pair the Pulse 1 hub

This video goes over the complete pairing process - To re-pair, only some of the steps will apply. 







These are the steps to re-pair your hub:

1. Add new location > Add new hub > Setup Wizard
  

2. The wizard will ask for the network password 
 
3. Reset the hub by pressing the setting button in the back of the hub for about 2 seconds - the light on the hub will blink blue


      

















NOTE: Make sure you DONT reset the HUB by putting a pin in the back - just press the setting button    
 
4. The app will search for the hub and make the connection, then the light on the hub will turn solid blue.

5. Press "Set Hub" to give the hub its name 

The hub is now added to the app, all devices and setting will be copied across to the new location.
 

Relevant Documents:



    • Related Articles

    • Pairing A Pulse 2 Hub [Android]

      The Pulse 2 Hub can be paired with Android devices, follow the below instructions for a successful pairing experience You cannot pair the hub via the Ethernet cable The Pulse 2 Hub only connects to 2.4ghz networks - please reference your router ...

    • Pairing A Pulse 2 Hub [iOS - Apple]

      The Pulse 2 hub is certified with Apple Devices and has native HomeKit integration. This means you can control Siri with voice commands the moment you setup your hub and shades! Follow the below instructions for pairing via iOS devices. You cannot ...

    • How to Re-connect Your Pulse 2 Hub to WiFi Network via an Apple Device

      Press and hold the P button on the back of the hub. Once it turns green, release. Green indicates that you've cleared out the internet connection. It will then start flashing blue. This indicates that it's ready to pair. SMART MESH NETWORKS Mesh ...

    • Pairing A Pulse 2 Hub via Ethernet [iOS - Apple]

      The Pulse 2 hub is certified with Apple Devices and has native HomeKit integration. This means you can control Siri with voice commands the moment you setup your hub and shades! Follow the below instructions for pairing via iOS devices. While pairing ...

    • Pairing A Pulse 2 Hub via Ethernet [Android]

      The Pulse 2 Hub can be paired with Android devices. Follow the below instructions for a successful pairing experience. While pairing via Ethernet, a backup Wi-Fi connection can be saved to the hub Check the Wi-Fi password for accuracy. If the wrong ...