Remote (P2) Button Locations and Functions
The P2 button is a programming button located on every remote. Typically, it is found on the back of the remote, under the battery cover. Refer to the images below for the P2 location on different control devices
Functions of the P2 Button:
- Pairing to the Pulse 2 app
- Setting/Deleting Favorite Position
- Creating/Deleting Group Channels
Remote (P2) Button Locations and Functions
Relevant Documentation
Related Products
Related Articles
Motor (P1) Button Locations & Functions
The P1 is found on every motor type. It is used for initial pairing and additional programming steps. Below is the location of the button on various motor models. Tubular Motor - Roller, Roman, or Zebra Shades Cord Lift Motor - Cellular and Honeycomb ...Copy Channels From an Existing Remote to a New Remote
It is Possible to copy channels from an existing remote to a new remote. Note: You will not be able to copy group channels, channel 0 or channel ALL. Only channel with individual shade programmed can be copied to a new remote via steps below in the ...Pairing Shades & Adding Rooms
Once you pair the Pulse 2 hub to the app, you will be prompted to 'Pair a Shade' If you would like to add additional shades or Rooms which allow for group control, see the instructions below When Pairing with 'REMOTE' make sure you wait for a ...Pairing A Pulse 2 Hub via Ethernet [Android]
The Pulse 2 Hub can be paired with Android devices. Follow the below instructions for a successful pairing experience. While pairing via Ethernet, a backup Wi-Fi connection can be saved to the hub Check the Wi-Fi password for accuracy. If the wrong ...Pairing A Pulse 2 Hub via Ethernet [iOS - Apple]
The Pulse 2 hub is certified with Apple Devices and has native HomeKit integration. This means you can control Siri with voice commands the moment you setup your hub and shades! Follow the below instructions for pairing via iOS devices. While pairing ...