How Do I Link My Shades With Apple?

How Do I Link My Shades With Apple?

Users are advised to pair Hub with Automate Pulse 2 App "Quick Start" Guide. Users can also pair Hub directly from HomeKit app and then retrieve it from Automate pulse 2 app. Utilizing HomeKit allows users to control their shades via "Siri".

Now to check if pulse 2 hub is paired with home kit app successfully do the following steps: 

Hub will show like below Picture which means Hub is Paired and is in the homekit.

Now Open Automate Pulse 2 App, you will get a notification that New Hub detected, press Yes to add it. 

Relevant Documentation

    • Related Articles

    • Pairing A Pulse 2 Hub [iOS - Apple]

      The Pulse 2 hub is certified with Apple Devices and has native HomeKit integration. This means you can control Siri with voice commands the moment you setup your hub and shades! Follow the below instructions for pairing via iOS devices. You cannot ...
    • How Do I Link My Shades with Google?

      The Pulse 2 Hub has a native integration with Google Home - meaning you can control your shades via voice through the Google Home app as well as allow it to work with other Google integrated products! You must have a Pulse 2 Hub and all shades paired ...
    • How Do I Link My Shades With Alexa?

      User can also link our Pulse 2 Hub with Amazon's Alexa. After linking Alexa with Pulse 2 Hub, user can say commands like "Alexa, open shade NAME" , "Alexa, Close shade NAME", or "Alexa Set shade NAME to 30 percent". Keep in mind that whatever is your ...
    • How to Re-connect Your Pulse 2 Hub to WiFi Network via an Apple Device

      Press and hold the P button on the back of the hub. Once it turns green, release. Green indicates that you've cleared out the internet connection. It will then start flashing blue. This indicates that it's ready to pair. SMART MESH NETWORKS Mesh ...
    • How to share and access the hub as a Shared User

      This process grants secondary users "guest" access to the shades. They won't have administrative rights to edit shades. Primary user will need to share the hub 1. Open the Pulse 2 app, click on the location that was created. 2. Under "Hubs" the hub ...