Pulse 2: How to Reconnect to Wi-Fi [Android]

How do I reconnect my Pulse 2 Hub to Wi-Fi?

1. Open the Menu, then press Hubs. Select the hub you wish to remove, and then press Remove Hub.

2. Add the Hub back following the steps below:

• Related Articles

• Pulse PRO: Wi‑Fi Requirements and Compatability

  Most modern homes use a dual‑band or tri‑band Wi‑Fi router. These can broadcast different Wi-Fi bands, mainly 2.4 GHz and 5 GHz. The Pulse PRO connects only to 2.4 GHz Wi‑Fi compatible networks. What Wi-Fi network type do I have? Below are the most ...

• Pulse PRO: Reconnecting When Offline [iPhone and Android]

  If your Pulse PRO was previously set up but is now offline, don’t worry—this article will guide you through the steps to get it back online. First, check your network and make sure there are no issues. If your Wi-Fi credentials or Internet Service ...

• Pulse 2: Wi-Fi backup via Ethernet not working

  What happens if I enter the wrong Wi‑Fi password during Ethernet pairing? If you pair the Pulse 2 Hub via Ethernet but enter the wrong Wi‑Fi password, the Hub will still pair successfully. Once the Ethernet cable is unplugged, it will fail to connect ...

• Pulse 2: Is My Wi-Fi Network Compatible?

  What Wi‑Fi requirements does the Pulse 2 Hub have? Most modern homes use a dual‑band or tri‑band Wi‑Fi router. These can broadcast different Wi-Fi bands, mainly 2.4 GHz and 5 GHz. The Pulse 2 Hub connects only to 2.4 GHz Wi‑Fi compatible networks. ...

• How to Reconnect your Pulse 2 Hub to Wi-Fi Network via an Android Device

  Press and hold the P button on the back of the hub. Once it turns green, release. Green indicates that you've cleared out the internet connection. It will then start flashing blue. This indicates that it's ready to pair. Not all Networks are ...