Shade Settings

Shade settings allow you to modify certain parameters for your paired shades

Press the Menu button

Select Shades

Then select the name of the shade you wish to modify

The following are the parameters you can modify with a brief description:

Edit Name

Modify the Shade Name   

Show

Show or Hide the shade from the main screen

Battery Level Check

Check the battery level of your shade

Set Fav. Position -

Set a favorite position for your shade

Toggle Charging LED

Toggle the charging LED light on/off (if applicable)

Set Upper Limit (unlocked mode only)

Set the shade's upper limit

Set Lower Limit (unlocked mode only)

Set the shade's lower limit

Motion Control (unlocked mode and Li-ion only)

Adjust speed and soft stop settings

Toggle Tilt/Roller Mode (unlocked mode and Li-ion only)

Toggle between tilt (step) or roller (smooth-motion) mode

Set Tensioning Mode (unlocked mode and AC/DC only)

Toggle fabric tensioning on/off

Toggle Impact Det. (unlocked mode and AC/DC only)

Toggle impact detection on/off

Change Type (unlocked mode only)

Change the type of paired motor

Delete Shade (unlocked mode only)

Delete shade from the remote control

 

• Related Articles

• Remote Settings - Push Pro

  You can customize a variety of settings on your remote control. Press the Menu button on the remote. Select “Remote,” then press the Enter button. Backlight – Choose between 5 levels of brightness Idle – Set the idle time for the remote display to ...

• Pulse PRO: Troubleshooting WPA3 Security and Router Settings

  If you're having trouble connecting your Pulse PRO to your Wi-Fi network, it could be due to your router using WPA3 security settings. This issue is commonly seen with certain routers, like the NETGEAR Nighthawk MK93S mesh router system, but it can ...

• Customizing Shade/Group Visibility - Push Pro

  You can customize the visibility of your shades and groups on the main screen. To show or hide a shade and/or group, go to the Shade or Group settings menu by pressing the Menu button on the remote. Select either “Shades” or “Groups” then press the ...

• Pairing Shades & Creating Rooms

  When Pairing with 'REMOTE,' ensure you receive a jog from the shade with each press of the 'P2' button on the back of the remote You MUST pair the Pulse 2 hub to your Wi-Fi before pairing shades Pairing a Shade/Motor to the app. Creating a Room ...

• Shade Signal Strength Troubleshooting

  <br><br><br> Shade Signal Issues & Troubleshooting If your shade isn't responding in the app, is slow to respond, or works intermittently — the issue is usually related to the signal strength between the Hub and the ...