Tilt / Step mode

How to turn on/off step mode on ARC motors.

• Related Articles

• How to Activate Fabric Tension (FT) Mode

  If you want to use Ultra-lock function, the Bottom limit MUST be set within the LOCKING ZONE. Jog the weight bar down until you hear the locking pin click into the latch housing and set Bottom  How to Activate Fabric Tension (FT) Mode After doing ...

• How to fix jogging/stepping Awning

  If your awning is paired to an AUTOMATE sensor (Motion Sensor or Wind & Sun Sensor). When you go to move your awning out and the awning only extends in a small steps. It is possible the motor has triggered the Safe Guard Technology feature, and is ...

• Remote - ARC Mode

  Ensure your remote control is in ARC Mode for operation

• How to Activate Impact Detection Mode

  Impact detection is deactivated by default. It can be activated in all three modes. i.e. Default mode, FT auto mode and FT manual mode.  How to Activate Impact Detection Mode If an obstacle is detected twice in the shade path during downwards ...

• Shade Control/Pairing Issues (EL Mode)

  Why is my Paradigm remote not controlling or pairing with my shade? If your Paradigm remote is not pairing with or controlling your shades, it might be in the wrong mode. This article outlines troubleshooting steps to check and resolve this issue. ...