Updating Push Pro Firmware

Updating Push Pro Firmware

Updating your Remote

Updating your PUSH PRO firmware helps ensure optimal performance while giving you access to the latest features and enhancements.

To update your PUSH PRO remote's firmware, you can use the PUSH PRO Updater Tool on your computer. This method requires connecting your remote to a computer via a USB cable. To get latest updates and resources, please visit: Hand Held & Wall Switch Controllers - Automate US

What you will need: Push PRO Remote

Data-capable USB-A to USB-C cable

Windows Computer

You will need to download the Update Tool from the website. Please follow the instructions in the Update Tool to update your firmware.
Download the Update Tool here: https://www.automateshades.com/resource/push-pro-firmware-update-tool/



For additional instructions see: automateshades.com/resource/push-pro-firmware-update-instructions/

    • Related Articles

    • Push Pro FAQ

      What are the advantages of the Push Pro over the Push remote control? On-screen prompts guide you through setup and shade mode adjustment 2.4” LCD with backlit display, optional dark mode, and Smart Wake for instant control Identify and control ...

    • Remote Settings - Push Pro

      You can customize a variety of settings on your remote control. Press the Menu button on the remote. Select “Remote,” then press the Enter button. Backlight – Choose between 5 levels of brightness Idle – Set the idle time for the remote display to ...

    • Pair a Shade - Push Pro

      The PUSH PRO remote can store up to 30 different shades. Your remote can communicate with your paired shade using ARC or a combination of ARC and Bluetooth. For more information, please consult your motor manual. Press the menu button on the remote. ...

    • Adjusting Motor Speed - Push Pro (Installer Mode)

      To perform the following steps, ensure you are currently in Installer Mode - Push Pro Press P2 on remote (The menu button while in Installer Mode) Increase Speed Decrease Speed

    • Copying Channels - Push Pro (Installer Mode)

      To perform the following steps, ensure you are currently in Installer Mode - Push Pro Set the old remote to the shade channel you wish to copy over Set the new remote to the shade channel you wish to copy the shade onto. Press P2 (Menu in Installer ...