Pairing A Pulse 2 Hub [iOS - Apple]

Pairing A Pulse 2 Hub via Ethernet [iOS - Apple]

The Pulse 2 hub is certified with Apple Devices and has native HomeKit integration. This means you can control Siri with voice commands the moment you setup your hub and shades! Follow the below instructions for pairing via iOS devices. 

While pairing via Ethernet, a backup Wi-Fi connection can be saved to the hub
Check the Wi-Fi password for accuracy. If the wrong password is entered, the Hub
will connect via Ethernet but won't connect to Wi-Fi if Ethernet is disconnected.
Only pair the hub via 2.4Ghz Wi-Fi or through direct cable pairing via an Ethernet cable.

How To Pair Your Pulse 2 Hub on Apple (iOS) Devices

Quick Start prompt will only occur if there are no Locations in the App.




Relevant Documentation



    • Related Articles

    • Pairing A Pulse 2 Hub via Ethernet [Android]

      The Pulse 2 Hub can be paired with Android devices. Follow the below instructions for a successful pairing experience. While pairing via Ethernet, a backup Wi-Fi connection can be saved to the hub Check the Wi-Fi password for accuracy. If the wrong ...
    • Pairing A Pulse 2 Hub [iOS - Apple]

      The Pulse 2 hub is certified with Apple Devices and has native HomeKit integration. This means you can control Siri with voice commands the moment you setup your hub and shades! Follow the below instructions for pairing via iOS devices. You cannot ...
    • Pairing A Pulse 2 Hub [Android]

      The Pulse 2 Hub can be paired with Android devices, follow the below instructions for a successful pairing experience You cannot pair the hub via the Ethernet cable The Pulse 2 Hub only connects to 2.4ghz networks - please reference your router ...
    • Pulse 2 Pairing Troubleshooting [iOS and Android]

      On occasion, you may encounter an issue pairing the Automate Pulse 2 Hub to your Wi-Fi network. This article will help you in those scenarios. The Pulse 2 hub must be connected to a 2.4ghz network The Pulse 2 Hub CANNOT connect to a 5ghz Network ...
    • Pair Hub Via Cable when Hub Firmware is below 1.8.0

      If a user attempts to pair a hub with a firmware version lower than 1.8.0: -the hub will not appear in the list of available devices in Step 5 of the pairing process. This is due to the fact that the hub is not yet compatible with Ethernet pairing. ...