How to do a Factory Reset of Motor

How to do a Factory Reset a Motor

Press and hold the P1 button for approximately 14 seconds to receive 4 jogs and 4 beeps.
The P1 button may be a different location depending on the type of motor you have

How to Factory Reset a Motor

Relevant Documentation

    • Related Articles

    • How Do I Program My Drapery Motor?

      It is important to set the programming of the motor after both the motor and track have been assembled. To ensure your shade is ready to be set up from scratch, factory reset it:  How to Program a Drapery Motor Relevant Documentation Automate Drapery ...
    • How Do I Setup My Shade/Motor?

      This article will show step by step, pairing with a Remote and programming the Motor limits for normal operation.       A new motor will have no programming and it will first need to be set up, for it to operate.       A motor that has had unexpected ...
    • Repair Recall - HUB RESET

      We are glad to hear that your hub has been returned to you. This hub has been reset to factory settings and it will need to be paired to the app and reprogramed. Please select the link corresponding to the device you will be using to pair your hub ...
    • 5v Li-Ion Motor | Advantages over 12v Li-Ion Motor (1st Gen)

      Rollease Acmeda's 5v Zero Li-Ion motors boasts many advantages over that of its predecessor - the 12v Li-ion motor.  5v Zero Li-Ion Highlights Reduced Motor Head thickness (Smaller Light Gaps) compared to the 12v motor offering. Integrated USB ...
    • Motor (P1) Button Locations & Functions

      The P1 is found on every motor type. It is used for initial pairing and additional programming steps. Below is the location of the button on various motor models. Tubular Motor - Roller, Roman, or Zebra Shades Cord Lift Motor - Cellular and Honeycomb ...