Push Pro
Copying Channels - Push Pro (Installer Mode)
To perform the following steps, ensure you are currently in Installer Mode - Push Pro Set the old remote to the shade channel you wish to copy over Set the new remote to the shade channel you wish to copy the shade onto. Press P2 (Menu in Installer ...
Enable/Disable Soft Stop - Push Pro (Installer Mode)
To perform the following steps, ensure you are currently in Installer Mode - Push Pro Enable Ensure that the motor is at its maximum speed. Then press P2 (The menu button while in Installer Mode) followed by Up twice, allowing the motor to jog ...
Adjusting Motor Speed - Push Pro (Installer Mode)
To perform the following steps, ensure you are currently in Installer Mode - Push Pro Press P2 on remote (The menu button while in Installer Mode) Increase Speed Decrease Speed
Setting/Deleting Favorite Position - Push Pro (Installer Mode)
To perform the following steps, ensure you are currently in Installer Mode - Push Pro Move Shade to desired position The following steps are used for Adding a Favorite Position, but are also for Deleting a Favorite Position if performed a second time ...
Installer Mode - Push Pro
Installer mode enables you to pair and adjust various settings, bypassing the usual step-by-step on screen instructions. Press the Menu button and select Settings by pressing the Enter button. On the Remote Settings screen, Select Installer Mode. To ...
Remote Settings - Push Pro
You can customize a variety of settings on your remote control. Press the Menu button on the remote. Select “Remote,” then press the Enter button. Backlight – Choose between 5 levels of brightness Idle – Set the idle time for the remote display to ...
Set a Timer - Push Pro
The Timer function allows you to set automatic behaviors for your shades and groups, such as opening, closing, or moving to your favorite position. Press the Menu button on the remote. Select “Timers,” then press the Enter button. Select Add Timer ...
Level-Setting Mode - Push Pro
This feature allows you to control your shade or group by percentage. Double-click the Stop button to activate the shade Level-Setting mode. Then, use the Up and Down buttons to adjust the desired shade percentage. 100% refers to the shade being ...
Navigation and Controlling Shades - Push Pro
Your Groups and/or Shades will appear by default on the main screen. Your Groups will be shown before Shades. To cycle through available Groups and Shades, use the Left and Right buttons. To adjust the height of your shade, press the Up or Down ...
Customizing Shade/Group Visibility - Push Pro
You can customize the visibility of your shades and groups on the main screen. To show or hide a shade and/or group, go to the Shade or Group settings menu by pressing the Menu button on the remote. Select either “Shades” or “Groups” then press the ...
Adding a New Group - Push Pro
Press the menu button on the remote. Select “Groups,” then press the Enter button. Select the Add Group option and press the Enter button. If you have already created a Group previously, the Add Group option will be at the bottom of the list. Naming ...
Groups - Push Pro
Groups are logical collections of shades, where multiple shades can belong to multiple groups. These groups can be organized by room or assigned custom group names according to your preference.’ Press the menu button on the remote. Select “Groups,” ...
Renaming your Shades - Push Pro
Press the Menu button on the remote. Select “Shades,” then press the Enter button. Select the name of the Shade you want to adjust and press the Enter button. Select Edit name and follow the on-screen information. Left/Right - Moves cursor position ...
Adjusting Shade Limits - Push Pro
Ensure your remote is in an unlocked state. Press the Menu button on the remote. Select “Shades,” then press Enter. Select the name of the shade you want to adjust then press Enter. Select Set Upper Limit or Set Lower Limit and follow the on screen ...
Set Favorite Position - Push Pro
The favorite position feature lets you assign a preferred level setting for each of your shades. Press the Menu button on the remote select “Shades,” then press the Enter button. Select the name of the shade you wish to configure. If you have a ...
Push Pro FAQ
What are the advantages of the Push Pro over the Push remote control? On-screen prompts guide you through setup and shade mode adjustment 2.4” LCD with backlit display, optional dark mode, and Smart Wake for instant control Identify and control ...
Shade Settings
Shade settings allow you to modify certain parameters for your paired shades Press the Menu button Select Shades Then select the name of the shade you wish to modify The following are the parameters you can modify with a brief description: Edit Name ...
Pair a Shade - Push Pro
The PUSH PRO remote can store up to 30 different shades. Your remote can communicate with your paired shade using ARC or a combination of ARC and Bluetooth. For more information, please consult your motor manual. Press the menu button on the remote. ...
Push Pro Button Overview
Updating Push Pro Firmware
Updating your Remote Updating your PUSH PRO firmware helps ensure optimal performance while giving you access to the latest features and enhancements. To update your PUSH PRO remote's firmware, you can use the PUSH PRO Updater Tool on your computer. ...